Description
The Kyosho Psycho Kruiser 2.0 VE 1/8 ReadySet Monster Truck with 2.4GHz Radio is a powerhouse of an RC, just waiting to bash its way out of the box and take on any contender. This extraordinary monster truck features a 3-diff shaft drive full time 4WD chassis with a design running thick with the DNA of the multiple world-championship winning Inferno. The combination of 22.2V 6-cell LiPo battery and 2000Kv KYOSHO SPEED HOUSE TORX8 brushless motor produces a ferocious power to weight ratio that delivers explosive acceleration and top speeds of more than 80km/h.
Features:
3 diff shaft drive full time 4WD chassis and 22.2V + brushless motor produce power like never before.
Fully factory assembled Readyset.
Pre-cut 4 color printed body.
Pre-installed 2000Kv KYOSHO SPEED HOUSE TORX8 brushless motor. (drip proof)
2.4GHz R/C system with Syncro KT-231P+ transmitter requires no frequency band control.
Includes waterproof ultra high torque KS5031-09MW steering servo.
Incorporates many reinforced parts such as hardened main chassis.
Features machined aluminum dial adjustable big bore shocks.
Straight cut bevel gears made from special toughened steel and gear modules on the reinforced diff ring gear are designed to match the machine's extreme level of power.Equipped with 6-spoke wheels & block tires. Balances rough road running power with high level grip performance.
Stabilizers and universal joints are equipped on front and rear.
Mud guard installed on rear axle provides protection from dirt and mud. Promises stable performance under various running conditions.
Resin chassis stiffener as used on the Inferno NEO is installed on front and rear.
Full bearing specification features 18 bearings through the drive system and wheels with 2 in the clutch bell.
Large bumper provides protection for the front suspension holders and lower arm plate.
Compatible with many optional parts for the Inferno series.
Specifications:
Length: 550mm
Width: 410mm
Height: 210mm
Wheelbase: 355mm
Tread (F/R): 345mm / 345mm
Tire (F/R): 148 x 66mm / 148 x 66mm
Gear Ratio: 17.2?1
Weight: 4,650g
Motor: KSH TORX 8 kv2000
Includes:
Pre-assembled chassis with pre-set control linkages
Factory assembled printed body
2.4GHz R/C system Syncro KT-201 pre-installed
L-shape hex wrenches: 1.5, 2.0, 2.5, 3.0mm
Cross wrench
17mm wheel wrench
Needed to Complete:
(4) AA alkaline batteries for transmitter
Running battery (2 x 7.2 v Ni-MH to 2 x 3-cell lipo battery w/T-style connector)
Charger
Stabilized power supply
Features:
3 diff shaft drive full time 4WD chassis and 22.2V + brushless motor produce power like never before.
Fully factory assembled Readyset.
Pre-cut 4 color printed body.
Pre-installed 2000Kv KYOSHO SPEED HOUSE TORX8 brushless motor. (drip proof)
2.4GHz R/C system with Syncro KT-231P+ transmitter requires no frequency band control.
Includes waterproof ultra high torque KS5031-09MW steering servo.
Incorporates many reinforced parts such as hardened main chassis.
Features machined aluminum dial adjustable big bore shocks.
Straight cut bevel gears made from special toughened steel and gear modules on the reinforced diff ring gear are designed to match the machine's extreme level of power.Equipped with 6-spoke wheels & block tires. Balances rough road running power with high level grip performance.
Stabilizers and universal joints are equipped on front and rear.
Mud guard installed on rear axle provides protection from dirt and mud. Promises stable performance under various running conditions.
Resin chassis stiffener as used on the Inferno NEO is installed on front and rear.
Full bearing specification features 18 bearings through the drive system and wheels with 2 in the clutch bell.
Large bumper provides protection for the front suspension holders and lower arm plate.
Compatible with many optional parts for the Inferno series.
Specifications:
Length: 550mm
Width: 410mm
Height: 210mm
Wheelbase: 355mm
Tread (F/R): 345mm / 345mm
Tire (F/R): 148 x 66mm / 148 x 66mm
Gear Ratio: 17.2?1
Weight: 4,650g
Motor: KSH TORX 8 kv2000
Includes:
Pre-assembled chassis with pre-set control linkages
Factory assembled printed body
2.4GHz R/C system Syncro KT-201 pre-installed
L-shape hex wrenches: 1.5, 2.0, 2.5, 3.0mm
Cross wrench
17mm wheel wrench
Needed to Complete:
(4) AA alkaline batteries for transmitter
Running battery (2 x 7.2 v Ni-MH to 2 x 3-cell lipo battery w/T-style connector)
Charger
Stabilized power supply